Everything you need, except the soap & water
Click any image above for a larger view
Click any image above for a larger view
To wash clothes by hand you need to either agitate them, or rub them. We have the tools you will need for either method.
Agitating clothes is easy and fast with our Plunger Washer Tool. It is designed to push water through the fabric on the downward stroke and then pull water up through the fabric on the upward stroke to dislodge the dirt with its patented vacuum design. The Plunger Tool provides better agitation than top load washers and the same as most front loading machines.
A washboard lets you rub the laundry over a surface designed to remove even the worst dirt and grime. Our special washboard has a textured glass surface instead of the old-fashioned corrugated metal surface. The glass surface is less abrasive to your fabric, and will never rust. A washboard can be used by rubbing bar soap onto the surface before scrubbing the dirty laundry over it, or by pre-soaking the clothes in water and detergent then rubbing the fabric over the washboard.
Complete Deal package
• 1 Hand Wringer
• 2 Square Washtubs • 1 Plunger Tool
• 1 Washboard
Save $38 $479.00
*Orders over $50.00 to continental USA.
This is the ONLY manual laundry wringer still made in the USA. Others, used for wringing chamois towels at car washes, are not really made for heavy clothes like jeans. Nor do they have the tiltable drip tray that lets you direct the water back to the washtub.
Our wringers are made of rustproof plated steel. There is an adjustable pressure control knob on the top of the unit. The 11" long rollers have a white rubber coating to protect buttons and zippers. The rollers are supported by classic maple bushings, and they are replaceable (if you ever manage to wear them out). Two clamps hold the unit securely to the washtub stand.
NOTE: Wringers are noisy. They squeak and squeal when being used. They all do this. It comes from the high pressure + slow rotation of of the steel shaft against the waxed wooden bushings. We do not accept returns because of noise.
Our steel wringer stand is precision made using a laser cutter. The tables solidly lock onto the center piece using slotted bars. The weight of the water in the tubs makes the stand very solid and steady.
This wringer stand quickly assembles and dis-assembles. It separates into 3 flat pieces for easy transport and storage between uses. The fasteners and wrench used to assemble the unit are all supplied by us.
This stand has been professionally powdercoated for a long lasting smooth white finish. The feet and ends are protected with black end caps.
These square laundry tubs minimize water from the wringer getting onto the stand. They are heavy duty polyethylene tubs that are made here in the USA. The dimensions of this 12 gallon laundry tub is 21" x 17" x 12" high.
You will only need to put 4 or 5 gallons in each tub. This lets you work without splashing the water out, and makes them easier to carry for dumping. You can use the round galvanized tubs with this stand, but you will get more water spilled from the wringer. Washtubs should be set upside-down after each use to drain any remaining water.
Very nicely built, well thought out design.
Goes together well with good instructions, wignuts and even a wrench in case you need to hold the bolts.
Ted in MT
I purchased my wringer, stand and washing tool in the Spring of 2016. I wanted an American Made product and found it in my own home state online.
This company answered all my inquiries. The items arrived well packaged and directions were easy to follow to put the stand together.
I hope there will be more Family businesses like this one that is honest, prompt, and courteous and have quality items that they make that are lasting.
I hope to buy from them the clothespins and clothes rack that I am saving up for. A mother from the Show Me State
Janet in MO
For items used INSIDE the continental United States:
We are very proud of our laundry products and we guarantee them to perform properly. If you are not satisfied with the construction or function of your item please contact us for a repair, replacement, or refund.
If you just change your mind and wish to return an un-used item: Contact us for assistance. Be sure to save the shipping cartons. You will be responsible for shipping costs to you and back to us.
For items used OUTSIDE the continental United States:
Due to the high cost of shipping repair parts outside the continental US (such as Alaska, Hawaii, US Territories, Canada, UK, Europe, Australia, etc) we do not offer any guarantee or warranty in these regions. All sales of items being transported outside the continental US are final and as-is. Click here for international shipping details
Page last modified on 2018-05-15